Screeds, Casings, Weeps

Screeds, Casings, Weeps

CEMCO manufactures several types of weeps, screeds, and casing beads for the exterior plaster industry. All are manufactured to tight tolerances using hot dipped galvanized steel that meets ASTM, Federal Specification, and FHA specifications.

Casing beads, sometimes referred to as stop beads, are available in either an expanded or solid flange, and with or without holes for weeping. The most common of these casing beads is the #66, which is available in grounds ranging from ¼” all the way up to 1 ¼”. All casing beads are delivered in cartons to protect the product until installation.

Weeps screeds do exactly what they are designed to do: weep water away from the structure through a series of holes. CEMCO’s No. 7 foundation screed is available in either FHA (26 ga.) thickness, or in an economy with 28 ga. steel, and in three depths: 4”, 5”, and the most common, 5 ½”. J-metal weeps channels are also available in both 26 and 28 gauge thicknesses, in either a 1 ¾” flange, or 3 ½” flange, depending upon the application. The J-metal comes in grounds from 3/8” all the way to 1 3/8”, and with or without holes.


#34 Foundation Sill Screed

The same high quality sill screed as our #36, but without weep holes.

...

Datasheet

#36 Foundation Sill Screed

The #36 sill screed is similar to the popular #7, but less the bottom return wing that allows for access below the stucco line to clean excess material, while leaving NO VISIBLE METAL below the stucco line. Complete with w...

Datasheet

#7 Foundation Sill Screed

CEMCO's #7 FHA Foundation Sill Screed is manufactured to provide both a ground for plaster finishes, and weep holes to allow for moisture to drain properly from the exterior plaster system. #7 Sill Screed is available in t...

Datasheet

J-Metals

A 26 gauge galvanized casing bead with various grounds used in conjunction with expanded polystyrene (EPS) foam insulation board. Provides a workable screed around doors and windows. Also available with holes so as to perf...

Datasheet

#66 Expanded Flange Casing Bead

Expanded flange casing bead also has a short 90° turn at the plaster surface for a neat finish. It also provides an extra long expanded flange for tie-on application, and greater plaster key. Most commonly used with metal...

Datasheet

#66 Short Flange Casing Bead

All ground casing beads have a short 90° turn at the plaster surface to neatly terminate plaster at the end of a wall or when it adjoins a dissimilar material. Manufactured with a slight arch in the nailing flange to assu...

Datasheet